Security Ranger III Betriebsanweisung PDF herunterladen (Seite 92)

Working with the Handheld Battery

Charging the Battery

The AC charger that ships with the unit has adapters to fit almost every electrical outlet. Connect the appropriate outlet

adapter to the AC charger. To charge the battery, plug the AC charger into the charging port on the bottom of the handheld

and plug the charger into an electrical outlet.

The handheld is fully charged in approximately 4.5

hours using the AC charger.

Acceptable temperature range for charging the

battery is 5...35° C (41...95° F).

Notification LEDs

The handheld has three notification LEDs (light

emitting diode) at the top that display color

indicators as shown in the table to show the

charging status. Refer to the picture of the handheld

on page 88 to see the notification LEDs.

Left LED Center LED Right LED

Battery Status OS (Operating

System) Status

Bluetooth Status

Green: Fully charged Red blinking: Alarm Blue blinking: On

Amber: Charging WWAN Status WiFi Status

Red: Battery error Amber blinking: 2G

connection

Green blinking: 3G

connection

Amber blinking: On

GPS Status

Green blinking: On

LED will flash in a

sequence if multiple

features are on

An optional DC charger is also available. Refer to document ORI-P-38-EN for ordering information.

FULLY CHARGE THE BATTERY AT LEAST 4 HOURS BEFORE USE. THE BATTERY LED LEFT LED WILL TURN GREEN WHEN

FULLY CHARGED.

Office Docking Station

When using the handheld docking station (instead

of using the AC charger) to charge the battery,

be sure the handheld is fully seated into the dock

and the charging pins are in full contact with the

handheld.

The LED on the right front on the dock is steady

green (does not flash) when the power is on and the

handheld is docked.

The docking station is designed to be set up on a flat

surface or mounted on a wall. Up to five units can be

connected together with a single power source.

Docking station

ALWAYS USE THE CHARGERS INTENDED FOR THE HANDHELD. USING OTHER CHARGERS WILL VOID THE WARRANTY.

Battery Power

When the fully charged handheld is still connected to the charger, verify the handheld battery charge using these steps:

1. Tap the Windows Start icon at the bottom left of the display screen.

2. Tap Settings> Power to view the battery power and the current battery charge status.

3. Tap Advanced, next to Battery, to see handheld power down selection options.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 92 February 2013

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 92

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Security Ranger III