Security Ranger III Betriebsanweisung PDF herunterladen (Seite 120)

TROUBLESHOOTING

Communications Error

The correct COM port must be set for any hardware attached to the handheld. Refer to "Hardware" onpage38 and "Valid

COM Ports" onpage112 for additional information.

Performing a Quick Read While Route Reading

If you are using the route reading software and attempt to access the ORION Endpoint Utility to perform a quick read

by going to Windows Start> Badger Field Applications> ORION Endpoint Utility, you will receiver a transceiver

communication error as shown here.

If you receive this error, tap Cancel. Then tap the Menu button and select Exit to return to route reading.

To perform a quick read while route reading, use the following steps to avoid a transceiver communications error.

1. From the account menu screen, tap the Menu button at the bottom of the screen.

Result: The Read Menu is displayed.

2. Tap the To Main Menu button at the bottom of the screen.

Result: The Main Menu opens.

3. On the Main Menu, select Program & Quick Read.

4. When you have completed the quick read, tap the

Menu button at the bottom of the screen.

5. On the menu that displays, select Exit.

Result: The software automatically returns to the

account menu screen in the route.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 120 February 2013

1 2 ... 115 116 117 118 119 120 121 122 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 120