Security Ranger III Betriebsanweisung PDF herunterladen (Seite 40)

High/Low Options

Tap High/Low Options on the Settings Menu to display the

settings for high or low readings.

Advance on High/Low: A high reading (higher than previous

readings) could indicate a leak or unusual consumption. A

low reading (lower than previous readings) might indicate a

tamper or meter malfunction.

Beep on High/Low: An audible alert sounds for a high or low

reading.

Show High/Low Values: Displays the high and low values on

the screen. If the values are set NOT to display by the reading

data management software operator, changing the option on

this screen does not aect the setting.

Figure 66: High/Low Options screen

Hi/Low Readings Fail: When checked, a reading is

considered high or low if it MATCHES the high or low value.

Unchecked, the high reading must be HIGHER and the low

reading must be LOWER.

High/Low Entry Disposition: This button is used only for

manual reads and manual reading entry. Tap the button and

then select one of the options (No Action Required, Accept/

Reject, Re-entry Required or Re-entry w/Cancel). Tap Select

to close the selection screen. The option that is selected

displays in the eld below the High/Low Entry Disposition

button. In Figure 66, the option is "Reentry Required."

Figure 67: Option selection screen

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 40 February 2013

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 40