Security Ranger III Betriebsanweisung PDF herunterladen (Seite 118)

USING VERSAPROBE WITH BLUETOOTH

IMPORTANT

The VersaProbe should physically be within 10 feet of the handheld to set up a successful wireless connection and the battery

should be fully charged.

Place the VersaProbe in Discovery Mode

This step places the VersaProbe in discovery mode so it can be recognized with the Bluetooth connection. If performed

correctly, this step only needs to done once.

1. Squeeze and hold the trigger of the VersaProbe.

Result: You will see a series of messages on the

VersaProbe display and hear three beeps.

After the third beep, the message “RELEASE BUTTON

NOW TO DISCOVER” is displayed.

2. Release the trigger.

Result: The VersaProbe is in discovery mode.

NOT:N The VersaProbe remains in Discovery mode

for five minutes during which time the

VersaProbe emits a fast ticking sound. The

Bluetooth connection to the handheld

must be made before the Discovery mode

connection times out.

Set up the VersaProbe Bluetooth Connection on the Handheld

This step prepares the Bluetooth to recognize the VersaProbe.

1. Go to Windows Start> Settings> Bluetooth.

2. Tap to select Mode in the selection bar at the top of the screen.

3. Check the box to "Turn on Bluetooth."

4. Tap to select Devices in the selection bar.

5. Tap Add new device.

Result: The system searches for the VersaProbe. When found, the serial number is displayed.

6. Tap to select the VersaProbe serial number. Then tap Next.

7. When requested, enter four zeroes (0000) in the passcode eld to establish a secure Bluetooth connection. Tap Next.

8. Tap to select COM Ports in the selection bar.

9. Tap New Outgoing Port.

10. When the VersaProbe serial number displays, tap to select it. Then tap Next.

11. Select the COM port. Valid COM ports are COM 8 and COM 9.

The secure connection check box should remain checked.

12. Tap Finish.

Result: The VersaProbe serial number and new COM port is displayed. The Bluetooth connection on the handheld is

complete.

13. Tap OK to return to the Windows home screen.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 118 February 2013

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 118