Security Ranger III Betriebsanweisung PDF herunterladen (Seite 54)

RTR Extended Status

Figure 90: Extended Status- RTR

The status indicators described below apply for an ORION ME or SE (mobile mode) endpoint when connected to an RTR.

Status Indicator Description

Mobile Mode Endpoint is communicating in mobile transmission mode.

IR Programmed Endpoint has been reprogrammed via IR.

Low Battery Endpoint is reporting a low battery condition.

Tamper Endpoint is reporting a tamper condition. This condition occurs when the wire between the

Odometer (RTR)" onpage50 for instructions on clearing the tamper.

No Usage Endpoint is reporting a no usage condition. This condition occurs when there is no water flow

registered over a 30-day time frame.

Leak Endpoint is reporting a potential leak condition when there is continuous usage over a 24-hour time

period without a 1-hour period of non-usage.

Index Changed Endpoint is reporting that the reading (odometer setting) was changed.

Encoder Information Description

Size & Type The size and type of the meter. Tap the button to change the size and type. Refer to "Programming

Meter Type, Size and Units of Measure (RTR)" onpage58 for more information.

Units The units of measure as defined by the encoder: cubic meters, cubic feet, gallons, imperial gallons

or liters. Tap the button to change the units. Refer to "Programming Meter Type, Size and Units of

Measure (RTR)" onpage58 for more information.

NOT: N Refer to the ORION Water Endpoint Technical Brief, ORI-T-58-EN, for complete information.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 54 February 2013

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 54