Security Ranger III Betriebsanweisung PDF herunterladen (Seite 116)

LOADING A ROUTE

1. Start at the Copyright screen. If you need help, refer to "Copyright Screen" onpage12.

2. Insert the memory stick with the route account

information into the USB port on the bottom of

the handheld.

NOT:N The USB port on the front of the

charging cradle can also be used while

the handheld is charging.

The memory stick with the route file information

must be initially matched to the handheld

before a route is loaded. Refer to "Initializing the

Memory Stick" onpage115 if you need help.

Result: Inserting the memory stick triggers the

Load & Unload button to display next to the

Trademarks and License buttons on the Copyright

screen.

3. Tap the Load & Unload button.

Result: The Load & Unload Routes screen opens and

displays the new route and the route information

displays on the screen.

4. Tap in the box that shows "Load New Route"to

load the route from the memory stick to the

handheld. An example is shown here.

Result: In a few seconds, the route loads and the

screen shows a route not read in the top box.

5. Tap Done to return to the Copyright screen.

Result: The route is loaded and ready to be read. The route information displays on the screen.

6. Remove the memory stick from the handheld.

Result: The Load & Unload button no longer displays on the Copyright screen.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 116 February 2013

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 122 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 116