Security Ranger III Betriebsanweisung PDF herunterladen (Seite 80)

ORION CE RF Quick Read-Single

The ORION CE RF Quick Read - Single screen is used to

perform a quick read on a single ORION ME endpoint serial

number using radio frequency (RF).

Figure 141: ORION CE RF Quick Read - Single screen

ORION CE RF Quick Read - Single Display Fields

S/N Enter the serial number of the ORION CE endpoint.

RSSI Received Strength Signal Indicator. The bar size increases as the handheld gets closer to the endpoint.

∆T Displays the number of seconds that have lapsed between transmissions. This field continues to

update during the quick read.

Status Any status alert displays in this field. Refer to "Status Codes" onpage112 for a list of codes.

Duration Displays the number of seconds since the Start button was tapped.

Tot. Count Displays the number of transmissions from the endpoint.

S/N Count Displays the number of endpoint readings currently showing on the screen.

ORION CE RF Quick Read - Single Buttons

Start/Stop Toggles to start and stop the quick read. Tap Start to start the quick read. Tap Stop to end the

quick read.

Reset Clears the current data, then continues to quick read.

To perform an RF quick read on a single endpoint, follow

these steps.

1. Tap in the S/N eld and use the handheld keypad or

the barcode scanner to enter the serial number of

the endpoint.

NOT: N Refer to "Barcode Scanner" onpage97

for steps on setting up the scanner for use.

2. Tap Start.

Result: Readings from the endpoint ll in the elds of

the table.

3. Tap Stop to end the quick read.

Figure 142: ORION CE RF Quick Read-Single screen with data

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 80 February 2013

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 123 124

Keine Kommentare

Security Ranger III Betriebsanweisung Seite 80