Security Ranger III Bedienungsanleitung Seite 1

ORION®Field Application 4.0for Trimble® Ranger 3 with ReadCenter®ORI-UM-00185-EN-05 (October 2014)User Manual

OTE:N The first time you access the software, the License Agreement screen opens automatically. The License Agreement must be accepted by an authoriz

Making Water Visible®www.badgermeter.comADE, BEACON, Making Water Visible, ORION, ReadCenter and RTR are registered trademarks of Badger Meter, Inc. O

8. Once the time and date are veried, the ORION Field Application main menu opens.OTE:N A route must be loaded to begin reading meters. See "Lo

MAIN MENUThe main menu is the starting point for all ORION Field Application operations. Figure 12: Main menuRead Route Tap Read Route to begin rea

USER GUIDEUSER GUIDE Page 13 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

READING METERSMPORTANTIThe COM port(s) must be set correctly for the handheld and the ORION Field Application software to operate correctly. Go to Set

Account Read ScreenWhen a route opens, the account read screen is the main screen that displays during meter reading. It shows account information, in

Figure 16: Account read screen – additional featuresReading hardware Reading hardware configured for the handheld is represented by an icon in the ti

Figure 17: Account read screen – status and navigationNavigation modeTo navigate through accounts in the route file, the meter reader can toggle from

Capturing Meter ReadingsThe ORION Field Application captures meter readings in one of three ways:• ORION radio (RF) read• Manually keyed read • Ver

VersaProbe Touch Pad Reads Before performing a VersaProbe touch pad read, make sure the VersaProbe battery is charged. Then follow these steps to add

Page ii October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

Auto and Manual Route NavigationChoose Auto or Manual mode when reading routes to navigate to the next account.Auto Mode Manual Mode• Automatically g

Route Progress1. On the account read screen, tap Menu> Progress to see a summary of meter information for the routes loaded on the handheld. 2.

Mark Route CompleteThe Select Route option displays all routes loaded on the handheld and gives you the option to mark a route “complete.“To mark a ro

Reader Codes, Trouble Codes, CommentsThe Messages button on the account read screen is used to create and view messages related to the account. Messag

Edit a Message1. Tap the Messages button on the account read screen to open the Messaging screen.2. On the Messaging screen, tap the code or comment

WORK ITEMSThe account read screen for an ORION Migratable endpoint includes a Work Items button. The Work Items button provides access to the two-way

Work Items ScreenTap the Work Items button on the account read screen to display the Work Items screen. The screen has three options: • Extended Stat

Requesting Extended Status ManuallyExtended status is additional information programmed into an endpoint, including meter type and size, unit of measu

Requesting Firmware Version ManuallyPerform the following steps to manually initiate a request for the endpoint firmware version from an ORION Migrata

Historical Interval DataThe ORION Field Application software is capable of extracting historical profile data from an ORION Migratable endpoint at the

CONTENTSINTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5GETTING STARTED

2. Tap Historical Interval Data. Result: The Select Days to Collect screen opens.3. Tap the number of days of historical interval data to collect: 7

OTE:N If you receive an error before the process completes, change your position and try collecting the data again.Figure 50: Data collection ”In Pro

SEARCHThe Search screen provides multiple ways to search accounts in the route file(s) loaded on the handheld. The Search function is available during

Search View TypeOn the Search screen, tap the view type button (between Save and Reset) to select Grid, List or Paged. This selection determines how t

Search CriteriaTap Search Criteria or tap the Search By field to see a list of search criteria.Figure 59: Criteria to search byAccount field labels s

How to SearchYou can search for an account in the route using any of the criteria in the Search By field and display the results in three different wa

4. Depending on your search criteria, additional elds display as in the example shown in Figure 63. Operator: Tap to select an option: Contains, S

Figure 66: Selected accountFigure 67: Account read screen menu7. On the account read screen, tap Menu. Then tap Search in the menu that displays to

Exception SearchUsing the Search function, you can find accounts with certain exception conditions. Symbols/icons that represent the conditions and di

Multiple Criteria SearchYou can add Search Criteria to narrow your search and get to the results you need quickly. This option is useful when looking

System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64General C

Saving a SearchThe software allows you to save a search. This option saves time for a search you perform frequently.1. From the Read Menu, tap Search

6. To search using a saved search, tap the Select Saved button. Result: The Select Saved Search screen opens and displays a list of saved searches.7.

QUICK READWhile route reading, you can select Quick Read to listen for all ORION endpoints within radio range for which the handheld is configured. OT

Quick Read - Paged View1. On the ORION Quick Read - All screen, tap Paged. (The Paged button toggles to List.)Result: In Paged view (Figure 85), each

LOAD/UNLOADThe Load/Unload option from the ORION Field Application main menu is used for loading route files to the handheld or unloading route files

ROUTE FILE MANAGEMENTChoose Route File Management from the ORION Field Application main menu to manage route file(s) currently on the handheld or prev

Clear Collected DataCLEAR COLLECTED DATA DELETES ALL ROUTE INFORMATION. THE INFORMATION CANNOT BE RECOVERED.1. Go to Route File Management> Clear

VERSA PROBE QUICK READChoose Versa Probe Quick Read from the ORION Field Application main menu to perform a Quick Read on a touch pad module using a

Performing a VersaProbe Quick ReadTo perform a Quick Read using the VersaProbe, follow these steps.OTE:N Before performing a VersaProbe Quick Read, th

SETTINGSChoose Settings from the ORION Field Application main menu to select or change the COM ports, handheld settings and/or user preferences associ

INTRODUCTIONThe ORION® Field Application 4.0 software is designed for Utilities that use the Trimble® Ranger 3 handheld computer for route meter readi

Hardware OptionsFigure 94: Settings: Hardware OptionsSelect Hardware Options from the Settings menu to view and change the communication (COM) ports

Add Device1. On the Hardware Options screen, tap Add Device. Result: The Add Device screen opens.2. Tap Type to see a list of device types. Then ta

Change PortOTE:N Adjustments to the COM ports should be made only with the assistance of Badger Meter Technical Support. 1. On the Hardware Options s

Route Reading OptionsSelect Route Reading Options from the Settings menu to view and change the settings that customize route reading. Each option is

Display Fields OptionsTap Route Reading Options> Display Fields Options to see the menu on the Display Fields Options screen. The screen has two op

Reading Entry DirectionsTap Route Reading Options> Directions to customize the direction of the reading entered for each service type. Tap Back to

Route Processing OptionsSelect Route Processing Options from the Settings menu to view and change the settings that impact route reading. Each option

High/Low Options Tap Route Processing Options> High/Low Options to view or change the settings that affect high and low values for accounts in the

Route Boundary AlertsTap Route Processing Options> Route Boundary Alerts to set a visible message that displays when moving from one route to anoth

Skipped OptionsTap Route Processing Options> Skipped Options to define the actions required by the meter reader for a skipped account, that is, an

Typographic Conventions• Bold: Bold text and upper case are used for items on the software screens that you need to select or choose by tapping a but

Data Transfer OptionsUse Data Transfer Options from the Settings menu to select the method by which you transfer account data route les—load/unload—t

Auto Start Wi-Fi On TransferUse Auto Start Wi-Fi On Transfer to automatically connect the handheld to the Wi-Fi network for data transfer. This can be

INTENTIONAL BLANK PAGEPage 62 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

HANDHELD OPERATIONHANDHELD OPERATION Page 63 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

TRIMBLE RANGER 3 HANDHELD OVERVIEWThe Trimble Ranger 3 is a handheld computer designed for fully automated data collection along a route for meters eq

Handheld Top ViewFigure 121: Top viewHandheld Bottom ViewFigure 122: Bottom viewGeneral Care of the HandheldUse a mild detergent and a clean soft cl

Initial Setup1. Install the battery.The Lithium-Ion (Li-Ion) battery is shipped detached from the unit. Insert the battery at the bottom of the compa

The battery can also be charged using the docking station. OTE:N For more information on the battery, see "Working with the Handheld Battery"

Working with the Handheld BatteryCharging the BatteryThe AC charger that ships with the unit has adapters to fit almost every electrical outlet. Conne

Conserving the BatteryThe handheld conserves battery power by turning itself off when not in use. Press and release the green power key on the keypad

GETTING STARTEDGETTING STARTED Page 7 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

Handheld Basic OperationsTurning On the HandheldTo turn on the handheld, press the green power key on the keypad. An audible beep sounds and the “boot

Using the Touch ScreenOTE:N This manual provides instructions for touch screen navigation and operation of the handheld. Quick Keys and Hot Keys are k

Screen ProtectorTo keep the touchscreen clean and protected, apply the screen protector following the instructions provided in the screen protector pa

Barcode ScannerDepending on the configuration, the handheld may include an integrated laser ID barcode scanner. OTE:N To be able to use the barcode sc

4. Tap to select the Circle Shortcut button. You may need to scroll to nd it. 5. Tap the Assign a program eld and select Scan Agent. You may need

FlashlightDepending on the configuration, the handheld may include a camera. The dual LEDs for the camera flash can also be used as a flashlight.Tap W

Working with BluetoothThe handheld has been designed to operate with the internal Bluetooth®—a short-range wireless communication technology that exch

Power:• Tap if you want to select "Maintain Bluetooth connections when device is turned off."• Tap if you want to select "Allow Bluet

Working with GPSTap Windows Start> Settings> System> System Information. Then select Wireless from the selections that display across the top

Working with the Speaker/MicrophoneThe handheld comes with an integrated speaker and a microphone. It also has a 3.5 mm audio jack that is wired for a

INITIAL STARTUPBefore using the handheld for the first time, see "Initial Setup" onpage66 to ensure that the device is set up correctly an

Factory Reset/Clean BootTHIS PROCEDURE RESETS THE TRIMBLE RANGER TO "FACTORY FRESH" CONDITION AND REMOVES ALL PREVIOUSLY ADDED SOFTWARE, INC

USING THE HANDHELD KEYPADFigure 151: Trimble Ranger 3 keypadYellow label denotes Hot KeyOn/O power Windows® StartFn (Function) key + Yellow label k

KEYPAD SHORTCUTSThe software includes a number of keys on the handheld that provide meter reading shortcuts.Quick Key Double press (or single press) t

CONFIGURATION OPTIONSThe Trimble Ranger 3 handheld is available in three configuration options: • Handheld with an internal ORION ME transceiver and

Connecting an External Mobile Transceiver or ReceiverFor handhelds configured with an internal transceiver or receiver (Config 1 and Config 2 on previ

APPENDIXAPPENDIX Page 85 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

GLOSSARYADE® Absolute digital encoder (ADE) is a position-based encoder that senses the position of each number wheel to determine the reading for tou

ORION CE The ORION Classic endpoint is a one-way local automated meter reading (AMR) system which communicates with a mobile receiver designed to read

ACCOUNT STATUS ICONSIcons display on the account read screen. Click an icon to see a description for what the icon represents.Route completedPotential

STATUS CODESStatus codes are displayed on several of the screens within the software. The following is a list of status codes and their descriptions.S

PROGRAM STARTUP AND EXIT1. Press the green power key on the keypad to turn on the handheld. 2. On the home screen, tap the Windows® Start button in

GAS METER DRIVE ROTATIONThe table below displays the drive gear rotation direction for common gas meter makes/models.CW = clockwiseCCW = counter clock

HANDHELD STATUS INDICATORSStatus indicators may display at the top of the screen. The status indicator icons are shown here with a description of what

LOADING AND UNLOADING WITH MEMORY STICKThe Load/Unload option on the ORION Field Application main menu is used to load and unload route files on the h

LOAD ROUTE1. Transfer the route les from the reading data management software to the memory stick. 2. Insert the memory stick into the USB port at

USING VERSAPROBE WITH BLUETOOTH MPORTANTIThe VersaProbe should physically be within 10 feet of the handheld to set up a successful wireless connection

Set the VersaProbe COM Port on the Handheld1. Access the main menu in the ORION Field Application software on the handheld. If you need help, go to &

TROUBLESHOOTINGCommunications Error The correct COM port must be set for any hardware attached to the handheld. See "Hardware Options" onpa

TECHNICAL SUPPORTErrors do not normally occur, so it is important to report all occurrences of error windows to Badger Meter Technical Support. OTE:N

INTENTIONAL BLANK PAGEPage 98 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

INTENTIONAL BLANK PAGEPage 99 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®